Your Cart Is Empty
✖No products in the cart.
Broncolor RFS 2.1 Transmitter
$200.00 /day
A universal 2.4 GHz wireless flash trigger and transceiver. Provides ultra-stable radio sync and remote power management across all standard hot-shoe camera systems.
A 10% damage waiver fee will be applied to your order in the rental basket unless proof of own insurance can be supplied.
The Broncolor RFS 2.2 Transmitter’s universal predecessor, the Broncolor RFS 2.1 Transceiver, remains an industry-standard studio workhorse for photographers running cross-platform or multi-brand camera systems. Utilizing a highly stable 2.4 GHz radio frequency, this universal single-pin trigger provides seamless wireless sync for all Broncolor flash units equipped with integrated RFS 2/2.1 receivers, including Scoro generators, Move packs, and Siros monolights.
The defining benefit of the RFS 2.1 is its absolute platform agnosticism. Featuring a standard central hot-shoe contact, it is fully compatible with any camera brand—from Fujifilm and Leica to Hasselblad, Phase One, Canon, Nikon, and Sony. Beyond reliable triggering, the RFS 2.1 serves as a powerful remote command module, allowing you to adjust flash energy output (in 1/10 or full-stop increments) and toggle modeling lamp states directly from your camera. Its smart transceiver design means a single unit can toggle between functioning as a transmitter on your hot shoe or a receiver plugged into an older legacy generator pack.
Applicable Scenarios:
-
Cross-Platform Commercial Shoots: Ideal for commercial productions where multiple assistants or photographers switch between different camera systems (e.g., Medium Format Phase One to full-frame mirrorless) on the same lighting setup.
-
Studio Remote Power Management: Effortlessly fine-tune the output ratios of hard-to-reach ceiling-mounted strobes or packed away floor generators without leaving your camera position.
-
Legacy Pack Integration: Use the dual-mode switch to turn the unit into a wireless receiver for older Broncolor or third-party power packs via a sync cord connection.
-
Universal Single-Pin Hot Shoe: Fully compatible with all standard camera hot shoes, ensuring reliable x-sync performance across any brand platform.
-
Dual Transmitter/Receiver Mode: Clever transceiver design can be toggled to work as a wireless hot-shoe master trigger or a standalone pack receiver.
-
Comprehensive Remote Power Regulation: Command flash energy levels (+/- buttons) and modeling lamp parameters seamlessly across all active lighting groups.
-
2.4 GHz Operational Band: Delivers reliable wireless performance with an extensive indoor operating range up to 30 meters and outdoor up to 200 meters.
-
Massive Network Mapping: Supports up to 99 channels and 40 individual lighting groups to isolate your signals perfectly on busy commercial sound stages.
-
Compact Coin-Cell Operation: Shaves down weight and physical bulk on your camera hot shoe by utilizing a long-lasting CR2450 lithium battery architecture.
-
Broncolor RFS 2.1 Universal Transceiver Unit x 1
-
CR2450 Lithium Coin-Cell Battery x 1
-
Protective Velvet Storage Pouch x 1
-
(Note: This rental item includes the transceiver trigger only. It does not include sync cables, camera bodies, lamp heads, or power packs. Please rent those separately as needed.)
-
Q: What is the main operational difference between this RFS 2.1 and the newer RFS 2.2?
A: The RFS 2.1 is a universal single-pin trigger that operates at standard camera flash sync speeds (typically up to 1/250s depending on the camera shutter). The RFS 2.2 is brand-specific (dedicated Canon, Nikon, or Sony variants) and incorporates specialized software loops to support High Sync (HS) up to 1/8000s.
-
Q: Does this RFS 2.1 trigger support High-Speed Sync (HSS) or High Sync (HS)?
A: No. The RFS 2.1 does not support HSS or Broncolor HS technology. It is strictly engineered for standard x-sync speeds. If your location project requires high-speed shutter curation to overpower the sun, please rent our RFS 2.2 Transmitter matching your specific camera body.
-
Q: Can I use this unit as a receiver on an older generator pack like a Topas or Grafit?
A: Yes! By switching the side slider from “XMTR” (Transmitter) to “RCVR” (Receiver), you can plug it directly into any legacy flash pack using a standard sync cord, bringing older gear into the modern wireless 2.4 GHz ecosystem.
-
Q: How is the rental fee calculated?
A: The rental fee is calculated on a 24-hour basis per rental period.
-
Q: Is a deposit required?
A: Yes, a corresponding deposit is required for all equipment rentals.
-
Q: What payment methods are accepted for the deposit?
A: We accept credit card authorization for the deposit, which is fast and convenient.
Related Rental Product
Camera & Video Equipment
Lighting Equipment
Lighting Stands, Grip Supports & Accessories
Digital Devices & Power
Studio & Production
Crew & Transportation Services